How To Apply ?

There are simple steps and method for how to preapre

1
Take approx 4 litre of water in a bucket and gradually add Tile Fixer (20kg.) in it.
2
After proper mixing leave the paste for 5 to 10 minutes for polymeric dispersion before apply.
3
Now apply the adhesive on the surface utilizing the indent trowel keeping up a layer of 5mm.
4
Remove excess adhesive immediately from the joints.
5
Always add Powder to water but never add water to Powder.

Advantages

Image
  • K bond is polymer modified grey cement based powder tiles adhesive need to be mixed with water and most suitable for installation of tiles on cementitious surface of internal plastered wall and floor. It provides excellent adhesion and waterproofing properties.
  • No Shringkage Cracks
  • 30-35 SQFT For 20 Kg Bag at 3MM Thickness
  • Remove excess adhesive immediately from the joints.
  • 20-22 SQFT 20 kg Bag at 5MM Thickness

Our Products

Tile Fixer C1


DETAIL

Tile Fixer C2


DETAIL

Tile Fixer C3


DETAIL